General Introduction:
Magnesium plays a very important part in producing the required physical properties of many aluminium alloys , its presence in others is not required at all or must be held to a very low percentage. LM-6 may be cited as an alloy in which the presence of magnesium is not required at all although a maximum of 0.1% is allowable as an impurity.
Magnesium Remover Flux provides a convenient and effective means of removing small amounts of unwanted magnesium from aluminium and its alloys.
By means of injection machine, injected with Nitrogen, the magnesium remover flux is action with the mg in al-alloy, the reactants floated onto the surface of the al-alloy melt. It also excites a degassing and cleansing action on the melt.
Advantages :
Aluminium alloys contaminated with Magnesium can quickly and economically be brought to the required
specification
Improved Al-alloy mechanical properties
A fine grain structure in aluminium alloys can be achieved.
Few dosage can achieve high efficiency with our Mg-remover flux. less smoke.
